VicRoads Standard Specification 610

Standard Documents >> 610 Structural Concrete - VicRoad

  1. Document Details. Publication Name. 610 Structural Concrete. Version Number. Publication Date. 06/25/2019. Last Reviewed Date. 06/25/2019. Document Type
  2. VicRoads Standard documents. Standard documents used in VicRoads road and bridge construction, maintenance and related contracts can be accessed through this page. General Conditions of Contract -current and recent releases of VicRoads General Conditions of Contract listed by name and revision number
  3. • Standard Specification 610 • Standard Specification 611 • Standard Specification 620 • Standard Specification 626. foundation material shall be assumed to be Other than as stated in this document and relevant VicRoads standard specifications, the provisions of AS1597.2 and AS5100:2017 shall apply. Where this document differs fro
  4. Standard specification sections for VicRoads contracts. Technical publications A to Z. An A-Z list of VicRoads technical publications and manuals. Safe System Engineering. Documents relating to the practical application of Safe System principles to the planning, design and operation of the road network
  5. Section 175 must be included in the specification.: 611.01 GENERAL. Requirements and test methods BS EN 10088 Stainless Steels (Parts 1-5) VicRoads Bridge Technical Note - BTN2011/001 Bending, Splicing and Welding of Grade 500 Reinforcement VicRoads Technical Bulletin TB46 Guide to Surveillance of Structural Steelwork The tests shall be.
  6. Contract specifications. Standard documents used in VicRoads road and bridge construction, maintenance and related contracts can be accessed through this page. General Conditions of Contract -current and recent releases of VicRoads General Conditions of Contract listed by name and revision number. Note: AS4300 - 1995-VR General Conditions.

Forms shall be manufactured from steel, except where otherwise approved by the Superintendent. The formwork shall be constructed so as to produce the finished concrete to the shape, lines and dimensions shown on the drawings, and in accordance with the surface finish and tolerances specified in Section 610 'Structural Concrete' in Section 610. 703.02 STANDARDS . Australian Standards are referenced in an abbreviated form (e.g. AS 1379). AS 1012 Methods of testing concrete . AS 1141 Methods of sampling and testing aggregates . AS 1379 The specification and supply of concrete . AS 1478 Chemical admixtures for concret Specification - Appendices Standard Sections - 000 Index and Changes Standard Sections - 100 Series - General Standard Sections - 200 Series - Formation Standard Sections - 300 Series - Flexible Pavements Standard Sections - 400 Series - Asphalt and Surface Treatments Standard Sections - 500 Series - Concrete Pavement paper serves as a record of the VicRoads' approach to providing durability provisions in its standard QA Bridgework Specification, Section 610 -Structural Concrete(I) Requirements for anti-graffiti protection of concrete are specified in Section 685 of the VicRoads Standard Specification for Roadworks and Bridgeworks. 686.02 STANDARDS Australian Standards (AS) and additional test methods (ASTM and BS) referred to in this section are listed in Standard Section 175. 686.03 DEFINITION

WARNING: Your details must never be shared with others for the purpose of accessing VicRoads' systems. Any breach of this condition will result in termination of your access; for partner accounts it may also result in the suspension or termination of your organisation's agreement/licence with VicRoads l) Vicroads Standard Specification 610 Structural Concrete, available from: https://www.vicroads.vic.gov.au m) Vicroads Code of Practice RC500.16 Selection of Test Methods for Testing of Materials and Work, available from: https://www.vicroads.vic.gov.au 1.3 Unless specified otherwise, the definitions in AS 1379 apply to this Part This specification is written as an overlay to ANSI/API Std 610, following the clause structure of the parent standard, to assist in cross-referencing the requirements. Where clauses from the parent standard (ANSI/API Std 610) are not covered in this specification, there are no supplementary requirements or modifications to the respective clause Purpose: - The purpose of these updated Standard Specification .pdf files is to aid designers in determining what the current effective Standard Specifications are as of the indicated letting date(s). The files incorporate approved revisions to constitute working editions of the Standard Specifications book. Context: - The NYSDOT Standard Specifications is a body of directions and.

614.01 GENERAL This section specifies the requirements for the design and construction of formwork required to produce the finished concrete to the shape, lines and dimensions shown on the drawing s, and in accordance with the finishes and toler ances specified in Section 610 'Structural Concrete'. 614.02 STANDARDS (a) Australian Standards concrete and inclusion in a number of standard VicRoads specifications, including general paving, reinforced concrete pipes and concrete pits. It is considered that the inclusion of geopolymer concrete in set out in Section 610 were manufactured and installed at the Salmon Street Bridge in 2009 [12] (Fig. 1) (Reference: VicRoads Standard Specifications 160.A4) 2.2 Insurances Provide documentary evidence, to the Superintendent, of the existence of a Public Liability Insurance Policy indemnifying Council against any claim for damage which may be sustained by the public due to the works Specification listings - standard sections We have developed the following new State Growth Specifications - Standard Sections (based on VicRoads Standard Sections). The new Tasmania specifications will apply to all construction contracts advertised for tender after 1 August 2016

VicRoads Standard documents : VicRoad

Any a dditional source rock requirements relevant to specific applications are covered in the appropriate product Standard Specification Sections. 801.02 DEFINITIONS . Assigned Los Angeles Value VicRoads will investigate and classify source rock in accordance with VicRoads Code of Practice for Source Rock 610 . 619 . 701 . 702 713 . 423. ##This section cross-references Section 175 - Section 175 must be included in the specification: 820.01 DESCRIPTION This section covers the requirements of 20 mm nominal size, crushed concrete and plant mixed wet-mix crushe

Design of large box culverts - VicRoad

  1. People unfamiliar with the electronics industry governing specifications ask the question What is the Difference Between the IPC-A-610 and the IPC-J-STD-001? This often is derived from a specification that a vendor reviews, the contract that a quality manager is making is compiled for by the electronic manufacturing services company or a soon-to-be IPC-certified trainer askin
  2. comply with the relevant requirements of Section 610. 705.02 STANDARDS Australian Standards are referenced in an abbreviated form (e.g. AS 1379). AS 1379 Specification and supply of concrete . AS 1627 Metal finishing - Preparation and pre-treatment of surfaces . AS/NZS 3679.1 Structural steel - Hot rolled bars and section
  3. As defined by Ref. ; Image stitching is a standard method to combine and visualize a collection of images. Another computer vision-based defect detection and condition assessment tool for civil infrastructure has also been proposed in recent years. AS.5100.5 (VicRoads Standard Specification Section 610 - Structural Concrete. Table 1) 0.1.
  4. Anditech is a direct distributor for AVONGARD, BUILDERA and SCANNTRONIK products in Australia. Our products meet several standards and specifications, including VicRoads 610.24 CRACKING OF CONCRETE
  5. For the purpose of this specification crushed rock is to be supplied in various in classes broadly defined as follows: Class 1 is a premium cohesive pavement base material for unbound pavements where a very high standard of surface preparation for a sprayed sealed or thin asphalt surfacing is required

610 1 Item 610 Roadway Illumination Assemblies (RIP) standard. Manufacturers may request that the Department add their submitted shop drawings and design calculations to a pre-approved list of optional and non-standard pole designs, maintained by the Traffic Operations Division VicRoads Standard Specification Section Changes (19 Oct 2017) - Free ebook download as PDF File (.pdf), Text File (.txt) or read book online for free. This is a list documentation of VicRoads Standard Specification Changes (updated on 19/10/2017). It is useful for contractors and designer to view the history of the standard specification This specification is written as an overlay to ANSI/API Std 610, following the clause structure of the parent standard, to assist in cross-referencing the requirements. Where clauses from the parent standard (ANSI/API Std 610) are not covered in this specification, there are no supplementary requirements or modifications to the respective clause Development within Sections 610-615 and Section 713 of the Standard Specifications. Also being issued is a special specification for Post Planting Care with Replacement for various plants and trees. TECHNICAL INFORMATION: Re-writes to Section 610 of the Standard Specifications include the following: 1

3. concrete shall be normal class n25 standard strength grade complying with the requirements of as. 1379. refer to vicroads standard specification 703 for requirements of concrete to be used in extrusion machines. 4. bedding to be compacted class 3 f.c.r. unless otherwise directed. ( refer sd110 ) 5. increase overall kerb profile (depth of. Uniform Standard Specifications and Details for Public Works Construction—2014 Revision to the 2012 Edition The MAG Standard Specificationsand Details Committee, with assistance from fivespecialized working groups, considered 26 cases during the 2013 session. Of these, 23 were approved and included in this revision IPC-6010-FAM: Printed Board Performance Specifications. Product Details. This family of documents includes qualification and performance specification standards for all major types of printed boards. IPC-6011 Generic Performance Specification for Printed Boards. IPC-6012 Qualification and Performance Specification for Rigid Printed Boards 2006 Standard Specifications for Roads and Bridges Manual. 12/9/2013 7:13 AM. 2006 Supplemental Specifications. 12/9/2013 7:18 AM. 2016 Standard Specifications for Roads and Bridges Manual. 4/19/2018 3:08 PM

Technical publications : VicRoad

requirements of Section 610. 705.02 STANDARDS Standards are referenced in an abbreviated form (e.g. AS/NZS 4680). (a) Australian Standards ASTM A820 Standard Specification for Steel Fibres for Fibre-Reinforced Concrete (c) VicRoads Test Methods RC 377.01 Determination of the Fibre Content of Fresh Concrete (Wash-out Method). The South Carolina Department of Transportation 2007 Standard Specifications for Highway Construction is hereby approved for application on highway and related construction contracts as referenced in the Contract and the Plans, and applies as noted and amended by those documents. Approved, D. R. Shealy, P.E. Director of Constructio

conforms to VicRoads specification 801, 812 & 815. Composition includes: Rock fragments produced by the crushing and screening of basic igneous source rock which conforms to the requirements of Section 801 (Source Rock for the Production of Crushed Rock and Aggregates) of the VicRoads Standard Specifications for Roadworks and Bridgeworks IPC-A-610 Order of Precedence Per 610 - In the event of conflict, the following order of precedence applies: • Procurement as agreed and documented between customer and supplier. • Master drawing or master assembly drawing reflecting the customer's detailed requirements. • When invoked by the customer or per contractual agreement, IPC-A-610 Specifications for Embankments and Base Course. When not specified, any of the following types may be used. (1) Soil Cement (2) Stone or Crushed Slag (3) Cement Stabilized Sand-Clay-Gravel (4) Asphaltic Concrete Base Course on Treated Layer (5) Recycled Portland Cement Concrete The base course shall be a selected base course type required to. Sections 200, 201, and 303 of the Standard Specifications, except as specified otherwise in FAA Specification Item P-610, as included and modified hereafter, and as shown on the Plans. ITEM P-610 STRUCTURAL PORTLAND CEMENT CONCRETE . DESCRIPTION 610-1.1 This item shall consist of plain or reinforced structural portland cemen Specifications Style Guidelines The Specifications Style Guidelines explain the format of the 2007 Standard Specifications and provide guidance to the designers in preparing Special Provisions for projects utilizing the 2019 Standard Specifications.The guidelines detail the writing style, word and number usage, and formatting.. Special Provisions The Project specific Special Provisions are.

The Standard Specifications for Road and Bridge Construction contain requirements setting out or relating to the method or manner of performing work or to the quantities and qualities of materials and labor for all FDOT contracts. Here you will find links to the standard specifications documents for current and recent past FDOT projects The Specifications contain dual units of measurement-The United States Standard Measure (English units) and the International System of Units (SI or metric units). The English units are expressed first with the SI (metric) units following in parentheses. The measurements expressed in the two systems of units are not necessarily equal

GLOBAL MESSAGE. But when you're done reading it, click the close button in the corner to dismiss this alert. AS/NZS 1554.1, 3, 5, AS/NZS 4100, VicRoads TB 46, VicRoads 630, Client specifications and similar standards Surveillance and Inspection of steel fabrication and structural steel erection Industrial processes - Inspectio

Please refer to the specifications page for more information. DPI 610/615 Specifications DPI 610/615HC Hydraulic Calibrator Priming Pump Feeds from external source Shut-off Valve Open for system priming Screw Press 0 to 6000 psi capability Pressure Port 1/8 NPT female Media Demineralized water and most hydraulic oils DPI 610/615I Indicator. 38 specified in Table 610-4 for the specified mix type. 39 When the percentage of RAP is greater than 20% but not more than 30% of the total 40 mixture, use RAP meeting the requirements for processed or fractionated RAP in 41 accordance with Section 1012-1. NCDOT 2012 Standard Specifications 610 ( ) 610 ( )i i o f r a m p c r ie n t a t 0.9 to 1.4 inches ion to be between base diameter of base diameter to be 50% - 65% top diameter min. 0.65'' 2.4'' max 1.4'' min tile installed anchor device to curb face of tactile system orientation - typical flared ramps 2.4 '' m ax 1.4 '' m in m in 0.65 '' with the 2019 odot standard. A number of standard sections are listed in Table 801.033 - if relevant those sections should also be included in the specification: 801.01DESCRIPTION This section covers the durability, hardness and, where applicable, the polished stone value requirements of sources (including recycled materials) used for the production of crushed rock and.

Standard drawings. Below are Council's standard drawings for Capital Works and Maintenance. These drawings are a combination of Council's own drawings and EDCM drawings. For new subdivision standard drawings please refer to Engineering Design and Construction Manual Appendix D. All files are in .pdf format Uniform Standard Specifications and Details for Public Works Construction—2017 Revision to the 2015 Edition The MAG Standard Specifications and Details Committee, with assistance from five specialized working groups, considered 20 cases during the 2016 session. Of these, 16 were approved and included in this revision. New Specifications

Contract specifications : VicRoad

The Transport and Main Roads Specifications are grouped into five categories. Each specification suite may consist of a Technical Specification (MRTS) and/or a Specification (Measurement) (MRS), with Annexures as required. The Sixth Edition of the Specifications Manual was released in July 2017 We can supply and install compliant guardrails for road building and civil works. Our expert team will coordinate delivery and installation to ensure there are no delays on site. Our road and industrial guardrail solutions include: The ET2000 Plus range of end terminals for the beginning of guardrails on highways and motorways. The Ezy-Guard. Previous Printed Specifications: US Customary Units. 2008 Standard Specifications. Metric Units. 2006 Standard Specifications. 2002 Standard Specifications. 1995 Standard Specifications

Contract Documents - VicRoad

Durability Provisions for Vicroads Structural Concret

Developed by the IPC-A-610 Task Group (7-31b) of the Acceptability Subcommittee (7-31) of the Product Assurance Committee (7-30) of IPC Usersof this publicationare encouragedto participatein the developmentof futurerevisions. Contact: IPC Supersedes: IPC-A-610F WAM1 - February 2016 IPC-A-610F - July 2014 IPC-A-610E - April 2010 IPC-A-610D. IPC-A-610D Acceptability of Electronic Assemblies 2nd Proposed Standard for Ballot ASSOCIATION CONNECTING ELECTRONICS INDUSTRIES® 3000 Lakeside Drive, Suite 309S, Bannockburn, IL 60015-121 TxDOT has established standards and specifications for the construction and maintenance of highways, streets and bridges. Below are links to documents and important information for contractors and professional service providers. 2014 Standard Specifications Book. Standards Committee. This list is provided as a centralized resource for standards required when working with ADOT. ADOT CADD Standards. ADOT Materials Testing Manual. Approved Products List (APL) Bridge Group Structural Detail Drawings. Construction Standard Drawings

Technical publications search : VicRoad

'Standard Drawings' means Hunter Water Corporation drawings. 'Standard Technical Specification' (STS) is a reference to any of Hunter Water's Standard Technical Specifications, as implied by the text. Headings are for the convenience of the reader and shall not be used in the interpretation of this STS MIL STD. Welcome to EverySpec.com, your premiere source for free downloads of government and military standards, specifications, handbooks, and documents. 0000-0099. 0100-0299

Updated Standard Specifications (US Customary

  1. IPC-A-610H is the most widely used electronics assembly acceptance standard in the electronics industry. IPC-A-610H standard includes a general update to the document, introduces several new surface mount component types and removes target conditions. Participants from 29 countries provided their input and expertise to bring this document to the electronics industry
  2. The standard specifications in this AC must be edited to develop construction specifications for individual federally funded projects. a. ash meeting the requirements of P-610 is added to the concrete, at a rate of 30% of . 12/21/2018 AC 150/5370-10H v cementitious material, or 55% slag cement, no reactivity testing of the aggregates shall.
  3. IPC-2221 is a generic standard for the design of PCBs. Within the 2220 series, there is also an IPC standard for flex PCBs, as well as standards for rigid and MCM-L PCBs. IPC-2221 addresses topics like design layout, parts lists, materials, mechanical and physical properties, electrical properties, thermal management and more

Specification and Us E of Geopolymer Concret

2004 Standard Specifications Book. Last Updated (12/15/2008) This document is provided for information only and is not to be used for bidding or contract purposes. Click here to return to Index Page. DIVISION VI - LIGHTING AND SIGNING (Items 610 to 636) Table of Content BUREAU OF AERONAUTICS - STANDARD SPECIFICATION P-610 Structural Portland Cement Concrete DESCRIPTION 1.1 This item shall consist of either plain or reinforced structural portland cement concrete, prepared and constructed in accordance with these specifications, at the locations and of the form and dimensions shown on the plans. Th 12. Refer to Australian Standard 2890.1 to ensure vehicles are not subject to scraping. 13. To be used on VicRoads Main Roads and Highways for residential crossovers as per VicRoads Supplement to the Austroads Guide to Road Design -Part 4-Intersections & Crossings-General. 14. Refer to Road Pavement Reinstatement in front o Perhaps the most used passivation standard previously is the US military specification QQ-P-35, which described the nitric acid treatments still in use today by ASTM A967 and AMS 2700. It also assigned testing per MIL-STD-753, which described several of the test methods still in use today. The cancellation of QQ-P-35 assigns the use of ASTM.

Specification listings - standard sections - Transport

STANDARD SPECIFICATIONS (US CUSTOMARY UNITS) VOLUME 4 SECTION 700 CONSTRUCTION AND MATERIALS September 1, 2020 50 Wolf Road Albany, New York 1223 Designation Title; F2408 - 16: Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets: F2453 / F2453M - 14(2019) Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) for Meshes of 6 in. 2 [3871 mm 2] or Less, in Panels or Rolls, with Uniform Meshes F2548 - 2 VicRoads. SECTION 626 - INSTALLATION OF PRECAST CONCRETE CROWN UNIT CULVERTS. ##This section cross-references Sections 173, 204, 602, 610, 611, 613, 614, 687, 689 and 812. If any of the above sections are relevant, they should be included in the specification IPC-2591 V1.3, Connected Factory Exchange (CFX). IPC-6902, Qualification and Performance Specification for Printed Electronics on Flexible Substrates. IPC-9257, Requirements for Electrical Testing of Flexible Printed Electronics. IPC-HDBK-001H, Handbook and Guide to Supplement J-STD-001 IPC-2551, International Standard for Digital Twins. IPC-7093A, Design and Assembly Process Implementation.

What is the Difference Between the IPC-A-610 and the IPC-J

  1. AC 150/5370-10G 7/21/2014 ii specification may be made unless the Engineer has received the approval of the FAA following the process described in paragraph 3 for modifications to standards
  2. Word standard to facilitate easier modification and sharing for future revisions. The detail drawings have all been updated to the 2010 AutoCAD standard, and converted into a linked PDF file. The MAG Standard Specifications and Details Committee, with assistance from five specialized working groups, considered 37 cases during the 2011 session
  3. The resulting dense graded asphalt mix was aimed for base courses of flexible pavements to endure moderate-to-heavy traffic loading according to local VicRoads standards. The combined aggregate gradation is presented in Table 3 with the upper and lower limits, as per Australian Standard AS 2891.3.3. 3. Experimental pla
  4. (VicRoads Section 610), unlike the non-structural grade concrete used in the paving project in Figures 1 and 2. Here the level of concrete specification and scrutiny was consistent with bridge design, with the aim of using the highest grade concrete specified by VicRoads as a 'stretch target' for trials
  5. Approved standard form contracts. Contracting requirements (Direction and Instruction 7.1) requires contracts to be in a form approved by the Secretary to the Department of Treasury and Finance.Collectively, these contracts are referred to as the Victorian Public Construction Contracts.. The following Victorian Public Construction Contracts have been approved by the Secretary to the Department.
  6. VicRoads will send members a Club Permit renewal notice, usually 4 to 6 weeks before the Permit expiry date. It is the Club Permit holder's responsibility to arrange for the renewal to be endorsed by one of our authorised BMWCCV signatories & have the renewal processed at VicRoads, before the expiry date

Classification and quantification of cracks in concrete

Uniform Standard Specifications and Drawing Archives The Regional Transportation Commission of Southern Nevada's (RTC's) Streets and Highways department provides many documents such as the Uniform Standards Specifications and Drawings archive information. Uniform Standard Specifications 2017 Revisions 2016 No Revisions 2015 Revision ASTM Headquarters 100 Barr Harbor Drive P.O. Box C700 West Conshohocken, PA 19428-2959, USA Tel: +1.610.832.9500 Fax: +1.610.832.9555 service@astm.or known as SI units or metric units) is the industry standard of measure for the sampling and testing of materials, only those units will be shown in Part X. However, like other parts of the standard specifications, when either English (inch-pound) units or SI (metric) units are commonly used, then both sets of units will be shown in Part X OUTLINE OF SPECIFICATIONS Each specification is outlined by Articles and Sections. The basic Articles required for a specification are: 1. DESCRIPTION 2. MATERIALS 3. EQUIPMENT 4. CONSTRUCTION OR WORK METHODS 5. MEASUREMENT 6. PAYMENT Some Articles are not used in every Item. Measurement and Payment Articles are combined when the work described i

Construction Special Provisions. The files presented here are FOR INFORMATION ONLY. If the information in these files should differ from the information in the printed Proposal furnished by the Department, then the printed Proposals will govern. All files are in either Microsoft Word (.doc) or Portable Document Format (PDF) Standard Construction Details, 2016. The Contractors are contractually required to follow only the printed bound booklet, Standard Construction Details Roadway-Traffic Control-Bridge, 2016 (pdf 42m), as of the date of the contract, and the revised details included as part of the Contract documents. Standard Details BDC Announcement D30 Piling TENDERING GENERAL 110 PILING SPECIFICATION • Standard: Comply with the current edition of 'Specification for piling and embedded retaining walls' (SPERW). • Substitution of British Standard for SPERW requirements: None. • References to Engineer in SPERW: For the purpose of this contract, interpret such references as being to the person named in section A10 as administering the. Most standard door widths up to 30'4 (9246 mm) and 28'4 (8636 mm) in height, and custom door sizes up to 1500 sq. ft. (139,355 sq.mm) Rolling service doors for heavy-duty, medium-duty and light-duty applications. The Stormtite™ AP Model 627 offers commercial and industrial facility owners the most advanced thermal performance values. BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 7/16/2021 11:51:38AM Bulletin 15 Description Bulletin 15 is a listing of prequalified materials that are eligible for use on Department construction projects